sales@shunhogroup.com.hk
You are here: Home » News & Article

News and Events

  • How to Select a Suitable Heat Sink

    2020-01-29

    Laptop computer designers, audio amplifier makers, and power supply manufacturers can keep their products cooler by following these fundamental heat-sink design equations for natural convection and forced-air cooling. Read More

  • What is metal stamping?

    2019-12-23

    Metal stamping is a cold-forming process that makes use of dies and stamping presses to transform sheet metal into different shapes. Read More

  • How to Establish Your Company’s Social Media Operations

    2019-12-13

    Imagine, if you will, a company with different business units, a multitude of social media accounts, uncoordinated content efforts, and varying degrees of engagement. Frankly, you should not have to imagine such a company because they are quite common. Read More

  • Why is the aluminum heat sink anodized?

    2019-12-01

    Aluminum is a material with good thermal conductivity, so mainly used for heat sink production, aluminum material heat sink we commonly known as aluminum heat sink, all aluminium profile here is not to point to aluminium only, still included aluminium alloy product. Read More

  • Double profits - Mr. Yin's high-end courses sharing

    2019-11-27

    We are proud to have atended the training of "Double profits - Mr. Yin's high-end courses" in Dongguan last week, thanks for sharing, Mr. Yin Read More

  • What is an Aluminum Heatsink?

    2019-11-26

    An aluminum heatsink is a device used with other electrical devices that produce heat to help manage heat production and prevent electronics from overheating. This type of heatsink is often used on the central processing unit (CPU) within a computer. Read More

  • What are the negative effects of excessive temperature on injection molded parts

    2021-07-25

    During the processing of plastic injection molded parts, the temperature is too high or low, which will cause adverse effects on the molded injection parts, which will directly cause the molded injection parts to be scrapped. Read More

  • What problems should be paid attention to when making the tin packaging?

    2021-05-03

    We are now using more and more tin box packaging products in our life, we need to pay attention to what problems we have when making the tin box packaging, so if we want to make products that are very good when we are making it, we must have good choice for it. Read More

  • How to sove the tin box with dirty issue?

    2020-10-21

    How to sove the tin box with dirty issue?Usually, it is enough to store tin cans as long as they are not kept in places below minus 15°C for a long time. You can choose to put the tin can on the display shelf as an exhibit to watch, let its soft and round color show its natural charm Read More

  • Process technology of making tin boxes and paper boxex

    2020-10-21

    With the development of society and the continuous improvement of people's living standards, consumers not only require the intrinsic quality of the goods, but also put forward higher requirements for the packaging of the goods when purchasing goods. Read More

  • Total 5 pages  Go to Page
  • Go

Contact Us

   (+86)-0769-88050188
  sales@shunhogroup.com.hk
 Business center: Room 806, Block A, worldecono
mic and trade center No. 11 Dong
guan Avenue, Dongcheng District , 
Dongguan, China

Message

Friendship links:PCB supplier ;  Strut mounts; Photograph & design; PCBA assembly in China
ShunHo Precision Electronics Group (HK) Limited   All rights reserved     Technical Support:Molan Network